Find the ideal mounting location for your PTZ cameras with PTZOptics Pole Mounts.

PTZOptics camera pole mounts are made in Pennsylvania from high-quality steel. The finished product is available with a white powder coat finish, which is designed to provide a durable product that will last you many years. This mount has been designed to be compatible with almost all PTZ cameras and features the industry-standard 1/4″-20 (Quarter-Twenty) mounting screw connection. Therefore this mount will work with all PTZOptics cameras and most small based SONY, Panasonic, Vaddio, Cisco, Polycom, DataVideo and Lumens cameras. With a ten-year warranty on every mount, we stand behind the quality of these camera mounts.

All of the hardware you need to attach your PTZ camera to an existing 1″ pole is included. Therefore you will receive the ceiling, a 1-1/4-20 mounting screw, a 10-32 x 1/4″ cup point set screw, a 3/32″ long arm hex wrench (for set screw) and two 14″ washers.

Please note: When attaching the pole mount to your 1″ pipe tighten until pipe can no longer be tightened with a pipe wrench. If you are using a 1.5″ plate or flange, you must use a 1.5″-1″ reducing bushing which is described in more detail in the included manual.